Question: What Liquid Do You Use For Polygel?

Can you use water for PolyGel?

When using acrygel, you want around 90% alcohol.

You want it to evaporate quickly because if it doesn’t, water can still be on it as it cures and when you put more, it prevents the added acrygel from adhering properly..

Why is my PolyGel not curing?

Using too much liquid Together with the Polygel, most brands have a special liquid which you need to use so the brush will not stick too much. When you take too much liquid the product will be liquified and it may flood. If you see that the nail is wet wait until the liquid evaporates and cure only after that.

Can you use Polygel with nail forms?

I use gelish polygel with my forms.… These are not intended to attach to the nail permanently. … These forms allow you to put acrylic or polygel on a natural nail easily and neatly. If you are using them correctly they just pop off by wiggling them from side to side.

How do you apply Polygel at home?

Take your two-sided brush and dip it into the slip solution to brush off any excess gel. Next, turn the nail around and create an even layer of gel on the back of your nail. Quickly cure the nail under your UV or LED lamp then when it’s ready squeeze the sides of the dual form and pop it off.

What can I use instead of gel cleanser?

A DIY Gel Cleanser. If you are completely out of options and you are desperate you can use certain household chemicals that have a high concentration of alcohol to clean off the sticky layer. Chemicals such as; Lysol, Hand Sanitizer, Perfumes should be able to work.

What can I use instead of acrylic liquid?

Acrylics dry very clear but give off very toxic fumes before it is cured. A good substitute is polyester resin. A peroxide is added to a polymer to create the resin that can be cast as easily as acrylics.

What can I use as slip solution for PolyGel?

You can use alcohol. I believe anything over 70 per cent would be ok. A more experienced Geek will probably have better, more elongated response.

Can you use alcohol instead of slip solution for PolyGel?

You can use 70% alcohol as a substitution for slip solution, which is what I did with the product. It works well!

Can you use acetone for PolyGel?

I use acetone for gel polish (to remove the tacky layer) and that works fine, but I’m brand new to polygel. … I’ve been using gel polish on my nails for years, and have never had an issue with the acetone.

Can I use vodka as slip solution?

I wouldn’t recommend vodka – you don’t know how the other 30% of ingredients will impact the polygel. You can use isopropyl alcohol / running alcohol which is super easy to source.

How do you apply PolyGel with forms?

Squeeze or use the picker to place the polygel onto the dual form. Just start with a little amount and add more when needed! Wet your nail brush with alcohol or slip solution to form the polygel smoothly. You can’t shape the gel without it.

Can you mix Polygel with nail polish?

The product can be applied as an overlay over natural nails, a tip overlay, or sculpted over a form. 6. It’s available in six colors: bright white, natural clear, soft white, soft pink, dark pink, and cover pink. … Gel-polish colors can be applied over the product, and Gelish can be mixed with PolyGel to create a design.